Startseite » Shop » Wing Foil » Wingfoil Foils » F-One Eagle Hm Carbon
1239.00CHF – 1419.00CHF
Das Eagle Foil von F-One bedeutet High End Carbon, bestes Gleiten, widerstandsloses Fahren.
Entwickelt für SUP downwind aber auch super für High End Wingfoiling.
Nicht vorrätig
Nicht vorrätig
Nicht vorrätig
Nicht vorrätig
1 vorrätig
1 vorrätig
Du möchtest sofort aufs Wasser, aber das Produkt ist nicht auf Lager? Kein Problem, wir helfen Dir gerne weiter! Du kannst uns über verschiedene Kanäle kontaktieren, sei es per WhatsApp, SMS, E-Mail oder telefonisch. Wir sind jederzeit für Dich da und freuen uns darauf, von Dir zu hören!
Unsere Infos zum F-One Eagle Hm Carbon:
Es ist das gestreckteste Foil der F-One Foil Range mit einem AR von 9.5.
Es bietet dabei den höchsten Speed und weitesten Glide aller Wingfoils von F-One.
So ist es super, für alle die High Performance Freeride, Downwind, und Swell Wingfoilen wollen.
Wir fahren das Eagle Carbon in der Grösse 790cm2 zum Wingfoilen bei Wind ab 15Knoten.
Zudem haben wir das Eagle 790 mit dem Stab C200 Carving für’s schwachwind Kitefoilen mit kleinem Kite entdeckt!
Das Eagle 790 ist das schnellste Foil der ganzen F-One Wingfoil Range.
Es ist für Fortgeschrittene und Wind ab 15Knoten.
Dabei bietet es Top Speed und Glide für mittlere bis grosse Wellen, Downwind Swell oder schnelles Freeriden.
Mit dem Eagle 790 kannst du mit kleinem Kite bei sehr schwachem Wind Kitefoilen.
Dabei hast du immer noch einen super Top Speed (ca. 45-48km/h) und sehr wenig Widerstand.
Das Eagle 890 ist das Set Up für F-One Chef Raphael Salles.
Für Wind ab 13Knoten.
Es eignet sich für mittlere bis grosse Wellen, Downwind Swell und schnelles Freeriden.
Es wird wohl das beliebteste Eagle Foil zum Wingfoilen sein.
Es bietet die Vorteile der hohen Streckung, geht bereits bei wenig Wind los, ist aber immer noch agiler als die Grössen 990 und 1090.
Das Eagle 990 und 1090 sind entweder für etwas schwerere Fahrer oder funktionieren als Leichtwind Waffe.
Wind ab 10Knoten.
Bis mittlere Wellen, Downwind Swell, schnellstes Freeride bei bereits schwachem Wind
Alle Foils und deren Eigenschaften ändern sich, je nachdem wie schwer die Fahrerin/der Fahrer ist.
Falls du nicht weisst, welches Foil für dein Gewicht passt, dann rufe uns an oder schreibe uns eine Mail.
Zum Eagle passt der F-One Carbon oder Alu Mast
The foils of the EAGLE HM CARBON line are designed to bring you thrilling speed potential, incomparable downwind sensations, and everlasting cruising time above the water.
The EAGLE HM CARBON is the ideal foil for anybody seeking speed and fantastic downwind abilities.
With its 9.5 aspect ratio, very thin profile and upturned winglets, the EAGLE’s induced drag is reduced to a minimum.
It is a very efficient foil whose lift will allow you to stay above the water and cruise for longer than you could have ever imagined at any speed.
Simultaneously, its upwind abilities are noteworthy, bringing comfort, stability, and constant speed to your wing foiling rides.
Pumping is effective and precise, and maneuvering will feel easy in any conditions.
Finally, the traction in your arms is reduced while wing foiling, thanks to the low drag of this foil.
Built using the Monobloc structure with pre-preg carbon, the foils are both very light and strong.
This setup brings improved load transmission and better stiffness throughout the different parts for maximum control.
The High Modulus Carbon fiber layup leads to even more rigidity and dependability that will propel you to incredible performances in each session.
The TITAN connection allows to plug in either an aluminum or carbon mast, and the fuselage is split in two to facilitate transport.
The EAGLE foils are available in 790 cm², 890 cm², 990 cm², and 1090 cm² to satisfy a wide range of riders looking for exhilarating sensations in wing foil and downwind.
They are recommended with the DW210 HM stab, just as thin as the front wing. This stabilizer will allow you to gain even more speed and pumping efficiency.
Passende Fuselage Länge:
Grösse Eagle | 690 | 790 | 890 | 990 | 1090 | 1290 |
---|---|---|---|---|---|---|
Empfehlung F-One Fuselage Länge | XXXS Monobloc DW190 | XXXS | XXS | XXS | XXS | XXS |
Unsere Empfehlung | XXXS oder XXS |
Die Grössen:
Grösse Frontwing | Spannweite | Aspect Ratio | Gewicht |
---|---|---|---|
790 | 86.5 | 9.5 | 0.95 |
890 | 92.5 | 9.6 | 1.02 |
990 | 97 | 9.5 | 1.07 |
1090 | 102 | 9.5 | TBC |
Pre-preg makes the foils stiffer and stronger.
With pre-preg fabrics, the carbon fiber is directly impregnated with epoxy resin by its manufacturer.
This guarantees a perfect ratio between epoxy and carbon and represents the highest quality process.
It is then cured at high temperature, bringing strength and durability.
The High Modulus Carbon fiber layup is 1.5x stiffer than the regular carbon fiber used in other constructions.
The percentage of high modulus fiber has been carefully adjusted to obtain the best stiffness in both bending and torsion.
While keeping enough comfort for any kind of practice.
The TITAN connection enables a very stiff and direct connection between two parts, locking efficiently any movement in all directions.
Its format is compact which is hydrodynamically efficient and very easy to use, assemble and disassemble.
Having a stiff and solid assembly between all the parts of the foil is key to making it perform at its best as well as easy to handle.
The connection of the front wing with the fuselage is highly stressed and loaded, so it is one of the critical areas of the assembly in terms of structures.
The Monobloc wings are molded together with the fuselage in one shot, thereby removing the connection and the chances for unwanted and parasitic movements.
Grösse | 1090, 1290, 690, 790, 890, 990 |
---|---|
Marke | |
Jahrgang | 2022 |